Categories
New products
-
Lens Ring Joint Gasket
China Lens Ring Joint Gasket manufacturer,supply Lens Ring Joint Gasket to your requirements. More quality Lens Ring Joint Gasket product info of Kaxite click here.
-
Double Jacket Gasket
China Double Jacket Gasket manufacturer,supply Double Jacket Gasket to your requirements. More quality Double Jacket Gasket product info of Kaxite click here.
-
Corrugated Gaskets
China Corrugated Gaskets manufacturer,supply Corrugated Gaskets to your requirements. More quality Corrugated Gaskets product info of Kaxite click here.
-
PTFE Envelope Gasket
China PTFE Envelope Gasket manufacturer,supply PTFE Envelope Gasket to your requirements. More quality PTFE Envelope Gasket product info of Kaxite click here.
-
CGFO Packing
China CGFO Packing manufacturer,supply CGFO Packing to your requirements. More quality CGFO Packing product info of Kaxite click here.
-
Double-jacketed gaskets
Double-jacketed gaskets are another combination of filler material and metallic materials. In this application, a tube with ends that resemble a "C" is made of the metal with an additional piece made to fit inside of the "C" making the tube thickest at the meeting points.
-
Constant seating stress gaskets
The constant seating stress gasket consists of two components; a solid carrier ring of a suitable material, such as stainless steel, and two sealing elements of some compressible material installed within two opposing channels, one channel on either side of the carrier ring.
-
Spiral-wound gaskets
Spiral-wound gaskets comprise a mix of metallic and filler material. Generally, the gasket has a metal (normally carbon rich or stainless steel) wound outwards in a circular spiral (other shapes are possible) with the filler material (generally a flexible graphite) wound in the same manner but starting from the opposing side.
-
Solid material gaskets
The idea behind solid material is to use metals which cannot be punched out of sheets but are still cheap to produce. These gaskets generally have a much higher level of quality control than sheet gaskets and generally can withstand much higher temperatures and pressures.
-
Sheet gaskets
The premise is simple in that a sheet of material has the gasket shape "punched out" of it. This leads to a very crude, fast and cheap gasket. In previous times the material was compressed asbestos, but in modern times a fibrous material such as high temp graphite is used.
-
Gasket Properties
Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).
-
Gasket
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.